Omnis Technical Note TNWE0023 Updated April 2010
Testing Web Client Applications with Windows UAC and IIS7
for Omnis Studio
Updated by Jason Gissing
This Tech Note is an extension of TNWE0022 and explains how to set-up a Web Server on Windows Vista* as the setup process is slightly different. As with the previous discussion, It assumes that you have a working Web Client application that you have tested as far as possible using the Test Form facility available in design mode and you are now ready to test the multi-threaded aspects of your application or to make it available to a wider audience.
*This article was originally written for Windows Vista but also applies to the Windows 7 operating system.
Latest Update: Windows Vista and Internet Information Services (IIS) 7
Setting-up a Windows Vista Server involves the following tasks:
1. Install Microsoft Internet Information Services (IIS)
To do this, go to your Start->Control Panel->Programs and Features (Add or Remove Programs in earlier versions of Windows) then select Turning Windows Features On and Off
In the checklist which appears, select Internet Information Services if not already selected and press Next.
You may need to insert the Windows installation disk if prompted.
2. Create a directory for the Web Client Plug-in
Once IIS has been installed, a root folder is created where your Internet pages will reside. For Windows, this folder is named Inetpub and exists in the root of your installation drive (e.g. C:\Inetpub). Following the convention set out in the Programming Manual, you should navigate to this folder and create a sub-folder named cgi-bin (i.e. C:\Inetpub\cgi-bin).
Dependant on whether your application will be using the omnisapi.dll or nph-omniscgi.exe plug-in, you should copy one or other (or both) of these files from the Omnis\clientserver\server\cgi or isapi folders into the cgi-bin folder. You do not have to use the name 'cgi-bin', but the path to the plug-in must match that used by the script inside your web form. (See step 4, below).
3. Make the Plug-in Folder a 'Virtual Directory'
This step makes it possible for remote clients to execute code on the server.
Go to Control Panel->System and Maintenance->Administrative Tools->Internet Information Services and expand the entry which is marked COMPUTERNAME (local computer). Expand the node marked Web Sites. Right-click on Default Web Site and select New->Virtual Directory... This starts the Virtual Directory Creation Wizard.
Click on the new virtual directory in the tree, and open its Handler
Mappings. Then Add module mapping.
Set the Request Path as "*.exe" if you're
using the nph-omniscgi.exe, or "*.dll" if you're using the omnisapi.dll.
Set the Module to CGImodule
for the nph-omniscgi.exe or IsapiModule for
If either of these is missing from the droplist, you will need to enable it. Go to Control Panel->Programs->Turn Windows features on and off->Internet Information Services->World Wide Web services->Application Development Features and check CGI for the .exe and ISAPI extensions for the .dll.
Set the Executable by browsing to your plugin file (.exe or .dll). Name the file as desired.
Now go up to the top level of the tree on the left of your IIS window,
and open ISAPI and CGI Restrictions
If your plugin file is not listed here, click Add, making sure to check the allow extension path to execute check box.
4. Copy in your Web Content and Change Script
tag containing the Omnis plug-in code.
In addition to the form width, form height, library and class name entries, you should verify that the server port entry (oserver) matches the value being used by Omnis Studio (i.e. the Omnis->Tools->Options $serverport property).
You should modify the owebserverurl to the IP address, DHCP lookup or Domain Name of the Web Server machine. The owebserverscript entry should contain the Inetpub-relative path to the plug-in that is used by the web form.
// Omnis replaces the text between $$Start and $$End, when it fills in the template
// If you wish to use this page with a web server, set the following variables to the script and URL,e.g.
// To enable auto-download of the Omnis Web Client Active X CAB file (providing support for Win32 Internet Explorer),
// set odownload to "yes"
// To pass parameters to the called Remote Task Instance set the following variables.
|Omnis plug-in script- used by the web page containing the web form|
5. Test Connection to the Web Application
Almost there! To ensure that the Omnis Server loads your Web Client library automatically, you may wish to move your library into the Omnis\startup folder. The application needs to be running and listening on the serverport in order to handle requests from Web Clients.
Either from the local or from a networked machine, open a Web browser and navigate to the page containing the web form.
|http://192.168.0.5/rForm1.htm||- addressing the Omnis Server by its IP address, e.g. over a LAN|
|http://myserver/rForm1.htm||- addressing the Omnis Server by its DHCP lookup (registered network name)|
|http://www.mysite.com/rForm1.htm||- addressing the Omnis Server using a registered domain name|
Provided the client machine has the Web Client (client-side) plug-in installed, the Omnis remote form should be displayed and you are ready to test your application. The Web Client plug-in is provided with the Omnis installation media and is also available for download from the Omnis website.
Please note that when using IIS7 under a 64Bit Operating System, you
will have to enable the 32Bit application execution (WOW64) for the OmnisAPI.dll
This can be done within the IIS7 Administrator as follows:
Select the Application Pools, Advanced Settings and then toggle 'Enable32Bit Applications'
Or, this can be set up via a script as follows:
cscript %SYSTEMDRIVE%\inetpub\adminscripts\adsutil.vbs SET W3SVC/AppPools/Enable32bitAppOnWin64 true
Or via AppCMD as follows:
appcmd set apppool /apppool.name:MyAppPool32bit /enable32BitAppOnWin64:true
Or by adding to the 'applicationHost.config' as follows: