Report. Next page fit.

[Andreas Pfeiffer]

Martin,

There is a property on the section $pagemode. Try to set it to kFitonpage

Does that help?

Best,

Andreas

[Martin FF]

Hi Andreas,

I tryed that and also kTestSpace. It will test or fitt page for the Header only (without considering the records below the records)

Martin

[Martin FF]

Correction: (without considering the records below the HEADER)

[Andreas Pfeiffer]

Hi Martin,

I get what you mean.

This is hard to determine as when the subtotal header is printed it cannot know how much space the records will need for this subtotal.

Therefore the only solution that I can see here is to estimate the number of space that is needed from the amount of records you are going to print in that section and then set the $pagespacing of the subtotal header to the appropriate space. This requires to have the $pagemode setting on kTestspace. So for example if you know that it will require 11 cms you can then set it to 11 etc.

I hope this helps.

Best,

Andreas

[Martin FF]

Thank you very much Andreas.

Regards,

Martin

• This reply was modified 9 months, 1 week ago by  Martin FF.
• This reply was modified 9 months, 1 week ago by  Martin FF.